Etype V12

Jaguar E type and XJS V12 Crossram inlet manifold and individual 45mm throttle body kit ITBs

Jaguar E type and XJS V12 Inlet manifold and individual 45mm throttle body kit ITBs

£3,695.00

Compare
Categories: , , , Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

  • 45mm throttle bodies for V12 Jag 
  • Crossram inlet manifold
  • Billet aluminium ram pipes
  • Steel fuel rails 
  • Linkage and spindles
  • 19mm long trumpets

 

45mm throttle body set to suit jaguar V12 Found in the XJS and Etype. This kit is ideal for road, track or rally use.

 

Removes the largely complex old management system in exchange for a more modern reliable injection system which will improve fuel economy, driveability and driver satisfaction.

 

This system has been designed to be a bolt-on kit requiring no modifications required to install or remove, thus allowing your car to be returned to its original condition if required down the line. The runners and throttle bodies fit very close to the heads and rocker covers.

 

Carbon airboxes and trumpets, fly by wire unit, TPS, injectors, shaftless throttles and complete bolt on ECU kits with wiring all available separately.

 

Made bespoke to order, 3-5 week lead time

 

Why Individual Throttle Bodies (ITB)?

Single throttle bodies are more cost effective to produce hence usually found on most road going engines.

 

Individual throttle bodies can be found on many performance cars and most Naturally aspirated competition cars. The reason is they offer large improvements in throttle response and efficiency due to the reductions in pumping losses from atmospheric pressure being available for each cylinder rather than being forced to take a longer path through the inlet manifold runners. This is achieved by applying an individual butterfly for each cylinder rather than all cylinders sharing a single larger throttle body.

 

The result is a change in engine note and increase in volume whilst improving overall power levels and throttle response.

 

Period correct aesthetics

We also appreciate keeping the period correct looks is important for a lot of the classic cars and with this consideration we can cater with a range of throttle bodies which are designed to look very similar to the older Weber of Dellorto carburettors from the older era but with a modern injection system cleverly disguised inside the housing.

 

Tuning and electronic fuel injection (EFI)

Runner length can be tuned with the trumpets which can alter the torque curve and peak HP. Each engine is different but generally speaking a high rpm engine will benefit from having shorter runners and a wider torque curve but less peak hp is achieved with longer runners. These systems offer the most improvements when matched with an aftermarket ECU. This gives finite control over all engine variables offering improvements in accuracy.

  

A lot of older cars are still running carburettors designed by Weber, Dellorto, Pierberg, Holley and others. Fitting a modern ECU allows better accuracy in your fueling and ignition systems. Electronic fuel injection can cater for any load, rpm, or altitude whilst monitoring air fuel mixtures it will always be adjusting parameters on the fly from its closed loop system. EFI systems are not subject to any fuel surge or frothing associated with floats and bowls in the older carb setups whilst also managing the extra g forces competition cars or modern suspension systems can bring to the fuel systems.

 

With this extra control the engine can run more efficiently and modern advances such as the ability to run an increased compression ratio without the risk of knock.

 

Drive/Fly by wire

This is becoming a popular option to go with our throttle body kits. Road cars have given The system has a bad reputation based on poor throttle response in the OEM vehicles, a proper motorsport ECU and modern drive by wire unit a fast and accurate response whilst providing mappable throttle curves, throttle blips on downshift for sequential boxes and control of engine braking.

 

Please follow and like us:
Make Model Year
Make Model Year
Jaguar Daimler Double Six 73–81
Jaguar E Type 61-75
Jaguar XJS 75–81
Facebook
Facebook
YouTube
YouTube